UKOM Optimum D-Ring Cobra Riggers Belt 45mm - Crye Multicam

As low as £80.00
In stock

100% Manufactured in the UK using the highest quality products available.

 

Based on the UKOM Optimum Riggers Belt, is one of the best belts on the market for those needing a heavy duty, lightweight riggers belt, and is currently in use with members of the UK Parachute Regiment.

Optimum-Crye-MC-Main
Optimum-Crye-MC-Main Optimum-Crye-MC-Open Optimum-Crye-MC-Backing Optimum-Crye-MC-Strip

Based on the UKOM Optimum Riggers Belt, this is one of the best belts on the market for those needing a heavy duty, lightweight riggers belt, and is currently in use with members of the UK Parachute Regiment.

 

100% Manufactured in the UK using the highest quality products available.

 

The AustriAlpin Cobra buckle being used alongside Crye Multicam Webbing is a 45mm Harcoated ANSI D-Ring Cobra Buckle. The buckle is the AustriAlpin D-Ring Cobra, it is a synergistic hybrid of two standard products of safety industry hardware: the parachute D-Ring and the ANSI cobra. The unique construction prevents the D-Ring from getting squeezed against the webbing and therefore guarantees easy handling. ANSI D-Ring cobra meets ANSI and CSA standards. The cobra locking mechanism is patented and guarantees highest safety. a one-sided opening of the lock is not possible even if the buckle is under load. Certified for saltwater, dust, sand and salt fog.

 

The webbing used for the belt exceeds 6000lbs breaking strain and is stitched using military specification thread.

 

The webbing is also doubled and a special layer is sewn in between giving the belt extra stiffness, this layer allows the belt to be comfortable but also prevents the webbing rolling when drop legs and holsters are attached.

 

The belt uses military specification hook and loop Velcro.

 

More about the buckle.

 

Strength:

Buckle:  18kN / 4000lb MBS (straight pull).  36kN Loop configuration.

Dring:    22kN / 5000 lb MBS (straight pull).

 

4000lb ANSI Z359.1 compliant Cobra Buckle

 

ANSI Cobra exceed all ANSI Z359.1 (4.3.1.3 and figure 25) requirements which stipulate that all hardware buckles and adjusters exceed a 17.8kN (4000lb) tensile load /internal frame test for one minute.